Correct Operation Method of Ice Crusher

- Jun 25, 2019-

1. First of all, the correct operation should start from the visit position of the ice crusher. In order to ensure normal work, the ice crusher should be level with the human body, generally installed on a workbench with sufficient supporting force and at an appropriate distance from the ground. ;

2, Secondly check the circuit problem, in addition to check whether the voltage of the power supply is stable, to ensure that all power requirements;

3. When the ice crusher is working, pay attention to the sequential method of adding the material. Then, the power switch must be turned on first. After the motor is turned with the power disk, the plate is pressed and the handle of the plate is pressed downward. The blade on the solid rotary cutter shreds the ice. This operation should also pay attention to the strength of the force, do not use too much force, so as not to block the motor and damage the motor;

4. The processed crushed ice will generally come out through the discharge port. At this time, it is necessary to ensure that the discharge port of the crusher is smooth and normal, otherwise it will easily cause the cutter to be stuck or even burn out the motor;

5, the size of the crushed ice processed by the ice crusher can be achieved by adjusting the cutter head, but remember to remove the protection switch device when adjusting;