Maintenance Of Flake Ice Machine

- Jun 20, 2019-

I. Flake ice machine maintenance

Warning: For any maintenance, repair, etc., please cut off the total power supply of the ice machine before operating. Especially when the ice machine is in the "ice full, water shortage" state and stop, do not perform any maintenance or repair on the ice machine (not to enter the inside of the machine), because the ice machine may automatically Start work and cause harm.

1. To ensure the quality of ice, you must pay attention to:

a, do not store anything in the refrigerator

b. Keep the refrigerator door closed and keep the ice shovel clean and free of dirt.

c. When cleaning the machine, do not let dust enter the ice machine through the vent.

d. It is forbidden to stack goods or other debris near the air-cooled condenser, and the ice machine is required to work in a well-ventilated environment.

2. To prevent damage to the machine, be aware of:

a. Do not cut off the water source while the machine is running.

b. When the switch is used to store the refrigerator door, the action should be gentle. Do not kick or slam the door.

c. Do not stack any objects around the storage refrigerator to avoid obstructing ventilation and deteriorating health conditions.

d. When starting the machine for the first time or not using it for a long time, the compressor heater should be energized for 3-5 hours before starting the compressor, and then run the ice machine.

e. It is strictly forbidden to expose the ice-making electromechanical box to a place with a large air humidity and not open for a long time. The high humidity may cause the PLC control system and the touch screen circuit board to burn out.

f. When the ice machine is not used for a long time, please supply power to the electric control box control system regularly to ensure the internal time accuracy of the control system.

3. Regular cleaning and maintenance

Users can make regular maintenance according to local water quality and environmental conditions, in order to ensure good performance and sanitation of the machine, regularly (about one month).

a. Wipe the inner wall of the refrigerator with a washing solution diluted with warm water.

b. After rinsing, thoroughly wipe the surface with liquid algae to disinfect.

c. Clean the cabinet and the body with a soft cloth and stainless steel special washing solution.

d, must pay considerable attention to the cleaning of the water system.

e. The water system is cleaned at least twice a year.

f. It is recommended to use a cleaning agent to completely remove mineral deposits and accumulated scale.

g. Regularly check the cooling waterway and the outdoor cooling tower to ensure that the cooling waterway is unobstructed and prevent debris from entering the bottom of the cooling tower.