Three Points For Attention In Using Ice Brick Machine

- Jun 20, 2019-

When using the ice brick machine, you must know some common sense of operation. For example, the point that needs to be paid attention to is the heat dissipation problem. Because the ice will produce some heat that needs to be dissipated, so it cannot be placed too close to the heat source. Location will otherwise put a burden on the equipment, and will also affect the efficiency of making ice bricks, so you must pay attention to a lot of details. Specifically, the precautions for the use of the ice brick machine include the following aspects.


3 major considerations for using a briquetting machine

First, pay attention to placement in a suitable environment

Before using these machines, the ice machine should be placed in a clean, well-ventilated environment. It should not be placed in the open air to avoid being exposed to wind, rain and sun. This is very dangerous and prone to aging. And the ice brick machine manufacturer emphasizes that it must be placed on the ground so that it can run smoothly during the operation to avoid noise or dangerous conditions. At the same time, it should be noted that there should be some space around it to be able to Good heat dissipation.


Second, pay attention to the conditions of use

The ice machine should be supplied with its independent power supply and the power supply must be grounded. This is the most basic problem that needs to be guaranteed to enable the machine to operate normally. It must also be equipped with a fuse and a leakage protection switch. Fluctuations cannot exceed the specified range to ensure safety in use. At the same time, the water source used by the ice brick machine should meet the drinking water standard, and it must be filtered before it can be officially used.


Third, pay attention to regular cleaning work

In order to ensure the normal operation of the ice brick machine, the water valve screen should be cleaned every two months to avoid clogging, and even after the ice brick machine is used up, the water inside the water tank will be drained for cleaning. The effect is not enough. It is necessary to thoroughly clean and disinfect at least every six months. If it is not used for a long time, it should be cleaned before it can be reused. And the ice brick machine manufacturer also reminded to keep the inside dry after washing, you can blow it dry with a hair dryer.