1, pay attention to the parts soaked and use a specific ratio of the solution
Ice machine manufacturers believe that in order to clean the ice machine, technicians need to disassemble the ice machine. Waiting for disassembly, you need to turn off the water source of the ice machine, cut off the power of the ice machine, and then soak the removed parts in the right amount. In the cleaning (or disinfection) solution, the ice machine manufacturer here reminds that the ratio of the solution should be in accordance with the specific requirements, especially the ratio of water to the cleaning agent or disinfectant, the ratio should be appropriate. Because if the ratio is not suitable, it will affect the cleaning effect.
2, pay attention to the use of appropriate cleaning tools and rinse thoroughly
Domestic professional ice machine manufacturers remind that the parts of the cleaning ice machine can not use relatively hard brushes, which will cause scratches on the surface, affecting the appearance or use effect. Therefore, the ice machine manufacturer recommends that the parts be carefully cleaned with a soft brush or sponge (do not use a metal brush), especially for cleaning the top, side and bottom of the protruding part of the evaporator. It needs to be thoroughly cleaned with a solution and a brush. It is also necessary to rinse thoroughly with water.