0 – 60 tons tube ice machine is available!
Working principle of tube ice making
The water is distributed and sprayed from the sprinkler on the top of the evaporator drum, flowing down by gravity through the inner surface of the seamless stainless steel conduit pipes. In the interior space between the conduits pipes, there is filled of cooled refrigerant. Therefore, the water begins to exchange heat with the refrigerant through the steel tubes, and the water temperature drops, finally it freezes to ice tubes.
When the ice tubes are manufactured, the PLC sends a signal to release hot refrigerant gas to the evaporator, and a fast melt is formed between the pipes and the ice tubes. Within the controlled defrost time, the ice tubes begin to fall down freely and then cut by the rotating ice cutter at the bottom. The ice tube of the desired length range is pushed out through the ice outlet.
Repeat the above procedures
This is the basic working process of tube ice machine!
Refrigeration products, food freezing, beverage mix, crushed ice, fresh fish cooling, snow making, concrete cooling, general ice distribution.